Sloping Roof Electrical Enclosures

Choose a sloping roof enclosure to prevent build-up of dust, debris and waste material. Sloping Roof Enclosures are designed to house a variety of electrical switch and control equipment while preventing build-up of dust, debris and waste material.

IP66 Sloping Roof Enclosures

The SSR range of sloping roof single door enclosures are designed for heavy duty applications.

Features & Specifications

Protection: Complies with IP66 IK10, NEMA 4 (Independent accredited test laboratory).

Standard: IEC 62208, IEC/EN60529, (UL508A Optional), RoHS, CE, UKCA

Conforming and certified to IEC 62208 – ‘Empty enclosures for low voltage switch gear and control gear assemblies’.

Material:

– Body: .1.2 Galvanised Steel Sheet
– Door: 1.2 Galvanised Steel Sheet
– Device Mounting Plate: Galvanised steel sheet
– Seal: Polyurethane

Enclosure Body:

The robust monoblock body with sloping roof is fabricated using 1.2mm galvanised steel sheet. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounting. The roof consists of a sloped roof design that protrudes past the seal, flush with the door face. Integral device plate mounts and M6 earth stud is provided.

Enclosure Door:

The robust surface mounted door is fabricated using 1.2mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal.

Enclosure Seal:

A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading).

Enclosure Lock:

Chrome 5mm double bit insert quarter turn lock with key. A full range of locking solutions are available upon request.

Device Mounting Plate:

The device mounting plate is galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.

Surface Treatment:

UL approved epoxy polyester powder coated with a textured finish. 80-120 micron average thickness. A full range of other colour options are available upon request. Refer to Electrical Enclosure Colours.